15
Care & Maintenance
Tips:
1. Always use genuine parts to keep your warranty from becoming void.
2. If the lter or nozzle becomes clogged, the vacuum will stop working shortly after being
turned on. To restore normal functions, clean the lter and/or nozzle.
3. If the vacuum is not be used for an extended period, fully charge it, unplug its charger,
and store it in a cool, low-humidity environment away from direct sunlight. To avoid
over-discharging the battery, recharge the vacuum at least once every three months.
2. Push the dust cup release switch in the direction indicated by the arrow, then gently
remove the dust cup from the vacuum.
Cleaning the Vacuum
Wipe the vacuum with a soft dry cloth.
Cleaning the Dust Cup, Pre-Filter, and Cyclone Assembly
The vacuum's cleaning ability will be reduced if the dust cup is lled to the "MAX" mark.
To regain performance, empty the dust cup in a timely manner. Before emptying the cup,
make sure the vacuum is disconnected from the power, and do not press its power button.
1. Press the dust cup bottom cover release button, then empty the contents.
2
1
EN
To Next Page
Loading...
Need help?
General
