18
2. Remove the HEPA lter from the
vacuum by pulling it down in the direction
shown in the gure.
4. Allow the HEPA lter to air dry for 24
hours.
12
6
111
57
210
48
39
24 hrs
Cleaning the HEPA Filter
It is recommended to clean the HEPA lter once every 4 to 6 months.
1. Remove the dust cup as shown in the
gure.
3. Clean the HEPA lter with clean water.
Make sure you rotate the HEPA lter 360°
to thoroughly and remove all dust caught
in the lter. Lightly tap the lter several
times to remove any excess dirt.
• Only use clean water to wash the lter. Do not use detergent.
• Do not attempt to clean the HEPA lter with a brush or nger.
Note:
2
1
Care & Maintenance
EN