33
english deutschfrançaisespañolitaliano
nederlands
3.2 Polymax 1/120 °C
Low Voltage Directive (2006/95/EG).
We herewith declare that the machine described below is in its conception and design and
in the shape delivered by us in accordance with the fundamental requirement for safety and
health as prescribed in the applicable EEC-guidelines.
In case of any change or modification of the machine not authorised by us this declaration
becomes invalid.
Denomination of the machine: Polymax 1/120°C
0-3428/D-3428-A/D-34281/D-34281-A
Type of machine: Pressure polymerisation unit
Applicable EC directives:
2006/95/EG Low Voltage Directive
2004/108/EG EMV Directive
Applied harmonised standards:
2006/95/EG Low Voltage Directive
EN 61010-1: 2010
Safety requirements for electrical equipment for measurement,
control and laboratory use – Part 1; General requirements
(IEC 61010-1:2010 + Cor.: 2011); German version EN 61010-
1:2010.
EN 61010-2-010: 2003 Safety requirements for electrical equipment for measurement,
control, and laboratory use – Part 2-010: Palticular requipements
for laboratory equipment for the heating of materials (IEC
61010-2-010:2003); German version EN 61010-2-010:2003.
2004/108/EG EMV Directive
EN 61000-3-2:2006 +
A1:2009 + A2:2009 Electromagnetic compatibility (EMC) – Part 3-2: Limits –
Limits for harmonic current emissions (equipment input
current <= 16 A per phase) (lEC 61000-3-2:2005 + A1:
2008 + A2:2009); German version EN 61000-3-2:2006
+ A1:2009 + A2:2009.
EN 61000-3-3:2008 Electromagnetic compatibility (EMC) – Part 3-3: Limits –
Limitation of voItage changes, voltage fluctuations and
flicker in public low-voltage supply systems. for equipment
with rated current <= 16 A per phase and not subject to
conditional connection (IEC 61000-3-3:2008); German
version EN 61000-3-32008.
EN 61326-1:2006 Electrical equipment for measurement, control and
laboratory use – EMC requirements Part 1. General requirement
(IEC 61326-1:2005); German version EN 61326-1:2006
Emission according to living area, business and industrial
undertakings as well as small enterprises interference
stability according to industrial area.
Dreve Dentamid GmbH · Max-Planck-Straße 31 · 59423 Unna/Germany
Tel.: +49 2303 8807-0 · Fax: +49 2303 8807-55 · E-Mail: dentamid@dreve.de · www.dreve.com
To Next Page
Loading...
Need help?
General
