Chapter 2.0 Understanding Your Keypad
12. OPEN This icon is used with clock digits 1 and 2 to indicate activated
z ones (not alarm) on the system. When zones are opened, the
OPEN icon will turn on, clock digits 1 and 2 will scroll through
the violated zones.
13. AC Indicates that AC is pre sent at t he main panel.
14. System Trouble Indicates that a system trouble is active.
15. Night Indicates that the panel is armedin the Night Mode.
16. Ready Light (green) If the Ready light is on, the system is ready for arming. If the
toggle of the Ready LED flashes for Force Arming enabled, the
LED flashes with force armable zones open on the partition.
17. Armed Light (red) If the Armed light is on, the syste m has been armed succe ssfully.
Note : For UL listed installations, zones can only be bypassed manually.
2.2 Keypad Models
Note : In the following list if x = 9 (the system operates in 912-919MHz), x=4 (the system operates
in 433MHz band) or x=8 (the system operates in 868MHz band). Only models operating in 912-
919MHz band are UL/ULC listed.
HS2LCD Alphanumeric LCD keypad
HS2LCDP Alphanumeric LCD keypa d with Prox. Tag support
HS2ICN Icon keypad
HS2ICNP Icon keypad with Prox. Tag support
HS2LED LED keypad
HS2LCDRFx Alphanumeric LCD keypad wi th wireless r eceiver
HS2LCDRFPx Alphanumeric LCD keypad with wireless receiver and Prox. tag support
HS2ICNRFx Icon keypa d with wireless re ceiver
HS2ICNRFPx Icon keypad with wireless re ceiver and Prox. tag support
HS2LCDWFx Wireless Alphanumeric LCD keypad
HS2LCDWFPx Wireless Alphanumeric LCD keypad with Prox. Tag support
HS2LCDWFPVx Wireless Alphanumeric LCD keypad with Prox. Tag support & Voice Promp
HS2TCHP Touchscreen keypad. For additional information, refer to the HS2TCHP
Touchscreen User Manual.
- 6 -
To Next Page
Loading...
Need help?
General
