Power 832 Application Notes – ESCORT Module Labels
Operation: The ESCORT module has programmable labels for zones, Partitions, keypad functions
etc… Up to 6 words from the library can be programmed for each, including the ability
to say any number between 0 and 999 three different ways.
Applications:
1. Programmed labels make the system easier to use. Rather than reading an abbreviated LCD label or
referring to a handwritten door label, the ESCORT will clearly announce the zone label.
example – ‘upstairs master bedroom window contact’
Program Sections: ESCORT Section [451] to [482] – Automation Item Labels
ESCORT Section [521] to [528] – Automation Mode Labels
ESCORT Section [545] to [546] – Miscellaneous System Labels
ESCORT Section [561] to [562] – System Partition Labels
ESCORT Section [601] to [633] – System Zone Labels
Label Library - Words
The word library is located in Appendix A of the ESCORT Installation manual and contains approximately
240 words. A three-digit number is assigned to each word. From the list, write down the three-digit
numbers for each word required for each label.
For example – ‘Living Room Motion Detector’ [127] = Living
[183] = Room
[145] = Motion
[054] = Detector
Label Library – Numbers
The ESCORT has the ability to say any number from 0 to 999 three different ways, Combined, Ordered
and Individual. Two of the six programmable words for a label are required to say a number, the first word
is how you want the number stated, the second is the actual number itself.
The following is an example of how the ESCORT can say the number (401).
Combined = ‘Four Hundred and One’
Ordered = ‘Four Hundred and First’
Individual = ‘Four Zero One’
example – ‘Second Floor Bedroom Smoke Detector’ [001] = Ordered
[002] = the number 2 (announced as ‘Second’)
[079] = Floor
[023] = Bedroom
[197] = Smoke
[054] = Detector
To Next Page
Loading...
Need help?
General
