Ducati 998S User Manual

36
E
Tool kit and accessories (fig. 23)
The following elements are located in area (1) under the
tail:
an Owner’s manual;
a helmet fastening cable;
a tool bag for usual maintenance and checks.
To reach this compartment, the tail guard must be lifted
by opening the catch (page 21).
The tool bag (fig. 24)
holds:
1) 14-mm box wrench;
2) 10/8/6/5/4-mm Allen wrench;
3) rear eccentric wrench;
4) front wheel spindle wrench;
5) extension for rear eccentric wrench;
6) box wrench for spark plugs;
7) tommy bar;
8) double-bit screwdriver;
9) helmet cable.
9
2
6
71
8
5
4
3
fig. 24
1
fig. 23

Ducati 998S Specifications

General

Displacement	998 cc
Bore x Stroke	100 mm x 63.5 mm
Compression Ratio	11.4:1
Transmission	6-speed
Frame	Tubular steel trellis
Front Brakes	2 x 320 mm discs, 4-piston calipers
Tire Front	120/70 ZR17
Tire Rear	190/50 ZR17
Engine Type	Liquid-cooled, 4-stroke, L-twin, Desmodromic DOHC, 4 valves per cylinder
Torque	97 Nm @ 8000 rpm
Fuel System	Electronic fuel injection
Front Suspension	Showa 43mm upside-down fork, fully adjustable
Rear Suspension	Showa monoshock, fully adjustable
Rear Brakes	220 mm disc, 2-piston caliper
Fuel Capacity	17 liters