1.3 Safety Issues & General Safety Rules
DO DO NOT
1. Read and understand this manual before
attempting to operate or service the
machine.
1. Do not attempt to operate or service the machine
without reading and understanding this manual.
2. Be familiar with the machine safety rules
and practices.
2. Do not remove the safety devices. Including
electrical interlocks.
3. In case of an accident while the machine, is
running press the emergency stop button to
stop the machine.
3. Do not start the machine unless you are sure there is
no danger to you or your fellow workers.
4. Warn others of an intended action that may
endanger them.
4. Do not clean or lubricate moving parts of a machine
that is running.
5. Perform lubrication and oiling of the
machine only when it is stopped.
5. Do not unauthorized persons to operate the
machinery.
6. Verify that all guards are installed before
operating the machine.
6. Do not wear jewelry, neckties, or loose clothing near
moving machine.
7. When working on electrical equipment,
power must be shut off to all circuits before
any work is attempted. Individual switches
must be opened, and the equipment circuits
tested to make sure there is no power.
7. Do not place tools on a machine that is running.
8. Be sure all operators are aware of all areas
and operations that require extra safety
measures.
8. Do not reach into the machine to make adjust while
it is running.
9. Keep the floor clean around the machine. 9. Do not use a rag on rotating rollers. Do not use any
cleaning cloths or paper on rotating rollers
10. Keep aisles and walkways clear. 10. Do not have anything (coins, pens, etc.) in your
pockets.
11. Return tools to their proper places after
use.
11. Do not allow horseplay in the work area.
To Next Page
Loading...
Need help?
General
