1. User Notes
1>SAFETY RULES
After receiving the machine, if end users require any further modification or change of one part or
several parts of the machines, they are obligated to advise the machines back to the manufacture for
this treatment.
We do not have any legal responsibilities if the breakdown of the machines or operator’s injuries is
caused by the importer’s modifications or changes to one part or several parts of the machines
performed by end users.
The machine has many safety features which make it a safe machine to operate. Regardless of your
experience, safety instructions must be read carefully, completely understood, and applied to your
daily work habits. If you do not understand or are confused by certain safety instructions presented in
this manual, discuss them with your supervisor. Machine setup, cleanup, and maintenance operation
will vary. Therefore, it is essential all employees to practice safe work habits. SAFE WORK HABITS
PREVENT INJURIES. The main rule to follow is to ALWAYS make sure the main drive is STOPPED and
LOCKEDOUT when performing setup, cleanup, and maintenance operations.
The safety precautions in this manual provide guidelines for the protection and for that of fellow
workers.
1.1 Precautions
Before any maintenance is performed on the machine, switch off all sources of energy, electrical, do
not operate the equipment when panels and safety guards are not in place. Failure to observe this
warning could result in personal injury.
1.2 Avoid Accidents
Most accidents are caused by the failure of some individual to follow simple and fundamental safety
rules and precautions. For this reason, most accidents can be prevented by recognizing the real cause
and doing something about it before the accident occurs. With any machinery, a careful and trained
operator is the best insurance against an accident.
To Next Page
Loading...
Need help?
General
