DURAVIT SensoWash i User Manual

42
4.3 Flushing functions
Pre-flush
Water applied to inner bowl ceramic prior to flush to remove and reduce leftover resi-
due and minimize cleaning effort.
(Default setting: „On“)
Full flush
Enables a water consumption of 4.3 lpf (liter per flush).
Eco flush
Enables a water consumption of 2.8 lpf.
+
Auto flush
Automatic flushing after leaving the seat.
Auto flush is only working when the user is seated for more than 6 seconds, 10 se-
conds after leaving the toilet it flushes automatically.
(Default setting: „Off“)
4.4 Settings
Night light
Illuminated inner bowl for night mode orientation.
(Default setting: „Auto“ - Night light is automatically switched on or off according to
the ambient light.)
Confirmation tone
To indicate any remote controlled command and the activating/deactivating of the seat
sensor.
(Default setting: „On“)
Auto opening and closing of seat and lid
See chapter 4.1 „Seat and lid“.
EN

DURAVIT SensoWash i Specifications

General

Brand	DURAVIT
Model	SensoWash i
Category	Toilets
Language	English

Summary

Overview and Product Identification

Toilet Unit Components

Details of the toilet unit components and features.

Remote Control Overview

Overview of the remote control buttons and functions.

Functional Areas Identification

Identifies key functional areas of the toilet.

Right Product Side Components

Highlights components on the right side of the product.

Left Product Side Components

Highlights components on the left side of the product.

Safety and Usage Guidelines

Description of Symbols

Explains warning and information symbols used in the manual.

Normal Use and Limitations

Defines intended use and limitations of the product.

Critical Safety Instructions

Crucial safety guidelines for operating the device.

Product Information and Features

Seat and Lid Operation

Information on automatic and remote-controlled seat and lid operation.

Washing, Drying, and Heating Functions

Details on washing, drying, and heating features.

Flushing Function Modes

Explains different flushing modes and water consumption.

Device Settings Configuration

Configuration options for night light, confirmation tone, energy saving, etc.

Basic Operation and Initial Setup

Remote Control Button Functions

Explains the functions of the remote control buttons.

Status LED Indicator Meanings

Interprets the meaning of different LED indicator statuses.

Initial Setup Procedure

Steps for setting up and starting the SensoWash® for the first time.

Operating the SensoWash®

Powering On and Off

Instructions for powering the device on and off.

Seat and Lid Control

How to operate the seat and lid using the remote or auto-opening.

Shower Function Usage

Detailed guide on using rearwash, ladywash, and comfortwash features.

Warm Air Dryer Operation

How to use and adjust the warm air dryer function.

Seat Heating Adjustment

Instructions for activating and adjusting seat heating.

Flushing Mode Selection

Details on auto flush, full flush, eco flush, and pre-flush modes.

Operating Settings Customization

Configuration for night light, confirmation tone, energy saving, and odor extraction.

Cleaning and Maintenance

Seat Unit Cleaning

Guidance on cleaning the main toilet unit and seat.

Ceramic Surface Care

Proper cleaning methods for the ceramic surfaces.

Stainless Steel Cover Maintenance

Care instructions for stainless steel parts.

Remote Control Cleaning

How to clean the remote control.

Handling Prolonged Disuse

Steps to take when the product is not used for an extended period.

Water Filter Maintenance

Maintenance and cleaning of the water filter.

Product Disposal

Environmental Disposal Guidelines

Environmentally friendly disposal methods for the product and batteries.

Troubleshooting Common Issues

Troubleshooting Support

Common problems, causes, and solutions for the SensoWash®.

Technical Specifications

Technical Data

Specifications and technical parameters of the SensoWash® unit.