Diffused and personal heating modes
Sleep timer
Oscillation and airflow speed control
Tilt function
Personal heating
Press the narrow angle button
to change from whole room
heating to personal heating.
To set the sleep timer, press and hold the timer button
to select the desired time. When time reaches zero, the
appliance will go into standby mode. To cancel, reduce
the time until two dashes appear.
Airflow speed control
To change the airflow
speed press the airflow
control button. The digital
display will show the new
speed; after 3 seconds it
will change back to the
target temperature.
Oscillation control
To start the appliance
oscillating, press the
oscillation control button.
To stop the appliance
oscillating, press it again.
The appliance will not
oscillate when the control
buttons are pressed.
Diffused mode
Press the wide angle
button to change from
personal heating to
whole room heating.
Carefully hold the base and the main body. Tilt the amplifier
forward or backward for the required airflow angle.
Heating and cool modes
work in this mode.
Heating and cool modes
work in this mode.
To Next Page
Loading...
Need help?
General
