To get the best performance and life from your battery, use Eco or Med mode.
Alerts
When the battery needs charging, your machine will pulse three times and a red warning icon will appear on the
screen. The alerts you might see are: Filter – the filter isn’t fitted correctly, or needs cleaning. Blockage – your
machine has a blockage that needs removing.
Charging your machine
It’s important to fully charge your new machine before using it for the first time and after every clean. This is because
the battery and monitoring system’s algorithm ‘learns’ over time, and fully charging your machine helps it to more
accurately calculate and display the remaining run time.
Connect to charger either directly
or in the dock. The blue LEDs on either side of the battery will flash during charging. When the battery is fully
charged, both LEDs will light for 5 seconds. Your battery is fully charged when the display shows 100%. Your
machine won’t operate if the ambient temperature is below 10°C (50°F). This is designed to protect both the motor
and battery.
Changing your click-in battery
Where you have additional batteries, we recommend that you alternate the batteries to maintain even performance.
To Next Page
Loading...
Need help?
General
