FOREWORD
This manual is designed to provide detailed information
necessary to service and repair the
Eaton@
Fuller@
Transmission listed
on
the cover.
As outlined
in
the Table of Contents, the manual
is
divided into 3 main sections:
a.
Technical information and reference
b.
Removal, disassembly, reassembly, and
installation
c.
Options
The format of the manual is designed to be followed
in
its entirety if complete disassembly and reassembly of
the transmission is necessary. But if only one compo-
nent of the transmission needs to be repaired, see the
Table of Contents for the page numbers showing that
component. For example, if you need to work
on
the
Shifting Controls, you will find instructions for removal,
disassembly, and reassembly
on
page 15. Instructions
for installation are
on
page 58. Service Manuals,
Illustrated Parts Lists, Drivers Instructions, and other
forms of product service information for these and other
Eaton Fuller Transmissions are available upon re-
quest. A Product Literature Order Form, Service
Bulletins (detailing information
on
product improve-
ments), repair procedures, and other service-related
subjects can be obtained by writing to the following
address:
EATON CORPORATION
TRANSMISSION DIVISION
Technical Service Department
P.O. Box 4013
Kalamazoo, Michigan 49003
(616) 342-3344
Every effort has been made to ensure the accuracy of
all information
in
this brochure. However, Eaton Transmis-
sion Division makes no expressed or implied warranty or representation based on the enclosed information.
Any errors or omissions may be reported to Training and Publications, Eaton Transmission Division, P.O. Box 4013,
Kalamazoo, Ml 49003.
2
To Next Page
Loading...
Need help?
General
