1
General Information
How to Use This Manual
This Eaton Publication is intended to be a reference guide for the installation of all Top 2 series transmissions. As much general
vehicle and transmission information has been given for covering the wide range of applications. This information benefits the
OEM installer by providing the correct installation procedures to ensure the utmost in satisfactory operation and long service life.
For specific engine information, contact engine OEM.
Specific OEM installation requirements are shown in each section.
Failure to adhere to Eaton installation requirements may effect transmission performance and/or warranty coverage.
Top 2 transmissions installed at OEM facilities must meet the requirements for standard manual Eaton Fuller transmissions out-
lined in Form FUL-169. Applications outside of these requirements must be approved by Eaton Engineering using Form FUL-170.
All information contained in this manual was accurate at the time of printing. With each new application, engine manufacturers
should be contacted to make sure desired engines are compatible with the Top 2 system.
To Next Page
Loading...
Need help?
General
