Eaton GridAdvisor Series II Service Instructions

2
Replacement of Cover Gasket for Padmount Switchgear Side-Hinge-2 Models
FIELD SERVICE INSTRUCTIONS MN285009EN April 2019
Figure 3. Caulk Gun - Half Barrel Frame
Figure 4. Proto MC10568000 9/16-inch impact socket
Figure 5. 10-inch flat screwdriver
Figure 6. Small aluminum-bronze hammer
Figure 7. 3-inch putty knife/flexible scraper
Figure 8. Proto J2120 aligning bar
Figure 9. Hand wire brush, brass-bristle, low-scratch,
3/4-inchwide
Figure 10. Containers/buckets for hardware removed
(Qty2)
Figure 11. Isopropyl alcohol (pre-moistened towels shown
here)
Figure 12. Workstand (“sawhorse”)

Eaton GridAdvisor Series II Specifications

General

Brand	Eaton
Model	GridAdvisor Series II
Category	Cables and connectors
Language	English