DESCRIPTION CS-2511T
22 X7503332503
© 11/19 ECHO Incorporated
5. CLUTCH - Turns drive sprocket when engine rpm is fast enough to
provide the power needed for cutting.
Preparation For Use
Saw chain is sharp! Always wear gloves when handling
assembly, otherwise serious personal injury may result.
Note: The machine may be delivered with guide bar, and saw chain
separated. Install guide bar, saw chain, and optional Kick
Guard
TM
as follows.
Instructions to Install Optional Kick Guard
TM
to Bar
Tools Needed: Two 11 mm (7/16 in.)
Wrenches.
1. Install bolt (A) in rear hole (B) of Kick
Guard
TM
and through front hole (C) in
guide bar.
2. IMPORTANT:
Dimple (D) in Kick
Guard
TM
must engage recess (E) in
guide bar.
3. Securely tighten nut (F) and bolt (A).
To Next Page
Loading...
Need help?
General
