Echo CS-500VL User Manual

• Install guide bar cover.
• Faster^ two nuts lightly. {Do not tighten UD totally.)
• Lift guide bar and turn adjustment screw clockwise until
chain comes in contact lightiy with bottom ot bar.
• Fasten two nuts firmly holding bar toward arrow as
shown.
• Confirm citain can be pulled by hat>d.
• Retension chain if necessary.
OPERATION
CHECK UP of Nuu and Screws
Check up on loose nuts and screws on the handle, fan cover and so on before usirrg the chain saw every day.
FUEL AND LUBRICANT
• Fuel is a mixture of regular grade gasoline and the ECHO biar^d motor oil (or an air cooled 2*CYCte engtne oil of
a reputable brand name).
• Mixture ratio is
Gasoline 20 parts: Dili part.
> Fuel mixture at a ratio other than 20:1 may cause
malfunction ol the engine. Watch out for mixture ratio.
- Pour 1/2 the gasoline into the safe container, add the oil and mix thoroughly.
Now add the remainder of gasoline and mix again.
- Disregard instruction on oil container.
- Do not use motor oil at random choice. - Avoid spilling fuel or oil. Spilled fuel should always be
- Do not mix directly in engine fuel tank. wiped up.
5 -

Echo CS-500VL Specifications

General

Brand	Echo
Model	CS-500VL
Category	Chainsaw
Language	English