Echo HC-2210 User Manual

OPERATION HC-2210 / 2810
22 X7702248101
© 10/21 ECHO Incorporated
5. Choke
After engine fires (or 2-3 pulls),
move choke (B) to the RUN ( )
(open) position. Restart engine if
necessary and allow unit to
warm up at idle for several
minutes.
Note: If engine does not start
with choke in “RUN”
position after 2-3 pulls,
repeat instructions 2 - 5.
The blades must not move at idle, otherwise serious personal
injury may result. Periodic carburetor adjustment may be
necessary to assure blades do not move at idle. If blades move,
readjust carburetor according to “Carburetor Adjustment”
instructions in this manual or see your dealer.
6. Throttle Trigger
After engine warm-up, grip the
throttle handle and support
handle. Depress the throttle
trigger lockout (E), and gradually
depress throttle trigger (F) to
increase engine RPM to operating
speed.
C
B
F
E

Echo HC-2210 Specifications

General

Brand	Echo
Model	HC-2210
Category	Trimmer
Language	English