Echo PE-225 User Manual

MAINTENANCE PE-225
28 X7732272804
© 03/21 ECHO Incorporated
Air Filter
Level 1.
1. Close choke (COLD START position). This prevents dirt from entering
the carburetor throat when the air filter is removed. Brush accumulated
dirt from air cleaner area.
2. Remove air filter cover. Brush
dirt from inside cover.
3. Replace filter if it is damaged,
fuel soaked, very dirty, or the
rubber sealing edges are
deformed.
• Lightly brush debris from
filter.
• Soak heavily soiled filters in
water/detergent solution to
loosen dirt, then brush
lightly.
• Rinse with clean water and allow to dry completely before reuse.
4. Install air filter in air filter case.
5. Install air filter cover.
Fuel Filter
Level 1.
Fuel is VERY flammable. Use extreme care when mixing, storing
or handling, or serious personal injury may result.
1. Use a clean rag to remove loose dirt from around fuel cap and empty
fuel tank.
Do not damage fuel line while removing fuel filter from tank or line.
Parts Required: Tune-Up Kit
Parts Required: TUNE UP KIT.

Echo PE-225 Specifications

General

Brand	Echo
Model	PE-225
Category	Edger
Language	English