OPERATION SRM-2620U
26 X7502341900
© 10/2016 ECHO Inc.
DO NOT INSTALL BLADES ON GT (CURVED SHAFT) MODEL
TRIMMERS.
• Arbor Diameter of Upper Blade Plate must match arbor diameter of
blades.
• New cotter pin required each time blade is installed.
• Brush cutters over 7.5 kg (16.5 lbs.) dry weight (weight w/o fuel) require a
double shoulder harness.
Note: The Barrier Bar is used to restrict rearward movement
of the unit. The Barrier Bar is NOT A HANDLE and
should not be gripped when using or carrying the unit.
Blade Selection
The type of Blade used MUST be matched to the type and size
of material cut. An improper or dull blade can cause serious
personal injury. Blades MUST be sharp. Dull blades increase the
chance of kick-out and injury to yourself and bystanders.
Plastic/Nylon Grass/Weed
Blades may be used where
ever the nylon line head is
used. DO NOT use this blade
for heavy weeds or brush!
8 Tooth Weed/Grass Blade is
designed for grass, garden
debris and thick weeds up to
19 mm (3/4 in.) diameter. DO
NOT use this blade for brush
or heavy woody growth.
To Next Page
Loading...
Need help?
General