Ecolab DM Modular 20 User Manual

4.4.3 Rinsing mode
By calling up the "Rinsing mode" function
Ä Chapter 4.4.1 ‘Beverage mode’
on page 21, Fig. 6, pos. 4, the display message changes and rinsing can be started.
Fig. 19: Rinsing mode - schema 1
The "Rinsing mode" is activated by pressing [OK].
Fig. 20: Rinsing mode - schema 2
Before rinsing starts, the remaining cleaning liquid is removed from the mixing container.
If the mixing container is empty
, the water valve opens and the mixing container is refilled.
Fig. 21: Rinsing mode - schema 3
If the upper filling level is reached, the rinsing will be started with water.
Fig. 22: Rinsing mode - schema 4
If the level is below the mid filling level, the water valve opens and the mixing
container is filled.
If the middle filling level will be underrun, a counter will be activated. If the middle filling
level not be underun after
5 seconds, the rinsing will be stopped and the mixing container
refilled again. In this case, the water valve will be opened at underrun of the upper filling
level.
Control / Visualisation
26Rev. 04-06.2018

Ecolab DM Modular 20 Specifications

General

Brand	Ecolab
Model	DM Modular 20
Category	Cleaning Equipment
Language	English