31
Using BIOS
PIO Mode (Auto Mode)
Use this item to set the PIO mode to enhance hard disk performance by optimizing the hard
disk timing.
DMA Mode (Auto Mode)
DMA capability allows user to improve the transfer-speed and data-integrity for compatible
IDE devices.
Press <Esc> to return to the Standard CMOS Setup page.
Type (Auto Mode)
Use this item to configure the type of the IDE device that you specify. If the feature is
enabled, it will enhance hard disk performance by reading or writing more data during each
transfer
IDE BusMaster (Enabled)
This item enables or disables the DMA under DOS mode. We recommend you to leave this
item at the default value.
Drive A (1..44 MB 3
1
/
2
”)
These items set up size and capacity of the floppy diskette drive(s) installed in the
system.
Press <Esc> to return to the main menu setting page.
To Next Page
Need help?
General
