39
Using BIOS
PC Health Status
On motherboards support hardware monitoring, this item lets you monitor the parameters
for critical voltages, temperatures and fan speeds.
Hardware Health Event Monitoring
Smart Fan Function Press Enter
Shutdown Temperature Disabled
Warning Temperature Disabled
CPU Temperature : 46°C/114°F
System Temperature : 26°C/78°F
CPU Fan Speed : 2547 RPM
System Fan Speed : 0 RPM
CPU Vcore : 1.296 V
VDIMM : 1.856 V
Help Item
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
PC Health Status
f
SMART Fan/Fan2 Control (Disabled)
This item allows you to enable/disable the control of the system/CPU fan speed by changing
the fan voltage.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Smart Fan Function
Item Help
SMART Fan Control Disabled
SMART Fan2 Control Disabled
Smart Fan Function (Press Enter)
f
Scroll to this item and press <Enter> to view the following screen:
Press <Esc> to return to the PC Health Status page.
Fan configuration
mode setting
F10: Save and Exit+/-/: Value
Enter : Select ESC: Exit
F9: Optimized Defaults
F1:General Help
: Move
mnlk
F10: Save and Exit+/-/: Value
Enter : Select
ESC: Exit
F9: Optimized Defaults
F1:General Help
: Move
mnlk
Shutdown Temperature (Disabled)
Enable or disable you to set the maximum temperature the system can reach before power-
ing down.
Warning Temperature (Disabled)
This item lets you select the temperature at which you want the system to send out a
warning message to the PC speakers of when the temperature goes beyond either limit. You
can select the tmperature you want.
To Next Page
Loading...
Need help?
General
