EasyManuals Logo
Home>ECS>Motherboard>671T-M

ECS 671T-M User Manual

ECS 671T-M
62 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #42 background imageLoading...
Page #42 background image
36
Using BIOS
Power Management Setup
This page sets up some parameters for system power management operation.
Select the ACPI
state used for
System Suspend.
Help Item
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Power Management Setup
ACPI Suspend Type S3 (STR)
Soft-off by PWR-BTTN Delay 4 Sec
PWRON After PWR-Fail Power Off
Wake-Up by PME Enabled
Power On by Ring Disabled
USB KB Wake Up From S3 Enabled
PS2 Keyboard Wakeup Disabled
PS2 Mouse Wakeup Disabled
Onboard PCIE LAN Wake Up Disabled
Resume on RTC Alarm Disabled
Press <Esc> to return to the main menu setting page.
Parallel Port Mode (ECP) (optional)
Use this item to select the parallel port mode. You can select Normal (Standard Parallel
Port), ECP (Extended Capabilities Port), EPP (Enhanced Parallel Port), or BPP (Bi-
Directional Parallel Port).
ECP Mode DMA Channel (DMA3) (optional)
Use this item to assign the DMA Channel under ECP Mode function.
Parallel Port IRQ (IRQ7) (optional)
Use this item to assign IRQ to the parallel port.
ACPI Suspend Type (S3(STR))
Use this item to define how your system suspends. In the default, S3, the suspend mode is a
suspend to RAM, i.e, the system shuts down with the exception of a refresh current to the
system memory.
Soft-Off By PWR-BTTN (Delay 4 Sec)
Under ACPI (Advanced Configuration and Power management Interface) you can create a
software power down. In a software power down, the system can be resumed by Wake Up
Alarms. This item lets you install a software power down that is controlled by the power
button on your system. If the item is set to Instant-Off, then the power button causes a
software power down. If the item is set to Delay 4 Sec, then you have to hold the power
button down for four seconds to cause a software power down.
F10: Save and Exit+/-/: Value
Enter : Select ESC: Exit
F9: Optimized Defaults
F1:General Help
: Move
mnlk
PWRON After PWR-Fail (Power Off)
This item enables your computer to automatically restart or return to its operating status.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ECS 671T-M and is the answer not in the manual?

ECS 671T-M Specifications

General IconGeneral
BrandECS
Model671T-M
CategoryMotherboard
LanguageEnglish

Related product manuals