30
Using BIOS
Standard CMOS Setup
This option displays basic information about your system.
Date and Time
The Date and Time items show the current date and time on the computer. If
you are running a Windows OS, these items are automatically updated whenever you make
changes to the Windows Date and Time Properties utility.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Primary IDE Master
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Standard CMOS Setup
f
Use [ENTER], [TAB]
or [SHIFT-TAB] TO
select a field.
Use [+] or [-] to
configure system Date.
Help Item
IDE BusMaster Enabled
Drive A 1..44 MB 3
1
/
2
”
f
Primary IDE Master Not Detected
f
f
Primary IDE Slave Not Detected
S-ATA 1 Not Detected
S-ATA 2 Not Detected
Date Thu, 01/ 25/2007
Time 00:01:21
Primary IDE Master
Device : ATAPI CDROM
Vendor : ASUS DVD-E616P3
LBA Mode : Supported
PIO Mode : 4
Async DMA : MultiWord DMA-2
Ultra DMA : Ultra DMA-2
Type Auto Mode
PIO Mode Auto Mode
DMA Mode Auto Mode
Help Item
Select the type of device
connected to the system.
fPrimary IDE Master/Slave, S-ATA 1/2
Your computer has one IDE channel and each channel can be installed with one or two
devices (Master and Slave). In addition, this motherboard supports two SATA channels and
each channel allows one SATA device to be installed. Use these items to configure each
device on the IDE channel.
F10: Save and Exit+/-/: Value
Enter : Select
ESC: Exit
F9: Optimized Defaults
F1:General Help
: Move
mnlk
F10: Save and Exit+/-/: Value
Enter : Select
ESC: Exit
F9: Optimized Defaults
F1:General Help
: Move
mnlk