33
Using BIOS
fHard Disk Drives (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
Hard Disk Drives
1st Drive ST3160812SV
Help Item
Specifies the boot
sequence from the
available devices.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Hard Disk Drives
f Removable Drives (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
Removable Drives
1st Drive 1st FLOPPY DRIVE
Help Item
Specifies the boot
sequence from the
available devices.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Removable Drives
Press <Esc> to return to the Advanced Setup page.
Press <Esc> to return to the Advanced Setup page.
F10: Save and Exit+/-/: Value
Enter : Select ESC: Exit
F9: Optimized Defaults
F1:General Help
: Move
mnlk
F10: Save and Exit+/-/: Value
Enter : Select
ESC: Exit
F9: Optimized Defaults
F1:General Help
: Move
mnlk
APIC Mode (Enabled)
This item allows you to enable or disable the APCI (Advanced Programmable Interrupt
Controller) mode. APIC provides symmetric multi-processing (SMP) for systems, allowing
support for up to 60 processors.
1st/2nd/3rd Boot Device (USB Flash Disk/CD,DVD/1st FLOPPY DRIVE)
Use this item to determine the device order the computer used to look for an operating
system to load at start-up time. The devices showed here will be different depending on the
exact devices installed on your motherboard.
Boot Other Device (Yes)
When enabled, the system searches all other possible locations for an operating system if
it fails to find one in the devices specified under the First, Second and Third boot devices.
Press <Esc> to return to the main menu setting page.
To Next Page
Loading...
Need help?
General
