37
Using BIOS
Advanced Chipset Setup
This page sets up more advanced information about your system. Handle this page
with caution. Any changes can affect the operation of your computer.
Internal Graphics Mode (UMA+SIDEPORT)
Use this item to choose the onboard VGA mode. You can select [Disabled] to disable
the onboard VGA, [UMA] to use the system memory, [SIDEPORT] to use the
onboard memory or [UMA+STDEPORT] to use both of the system memory and
onboard memory.
GFX Clock Override (Disabled)
Use this item to enable or disable GFX Clock Override.
SIDEPORT Clock Speed (400MHz)
This item allows you to adjust the onboard memory (SIDEPORT) clock speed, and it
is available for over-clocking or under-clocking.
Press <Esc> to return to the main menu setting page.
Warning: If Disabled Internal Graphics Mode, please Loading default to
Enable it.
Init Display First (PCI)
Use this item to select which graphics controller to use as the primary boot devices.
DCT Unganged Mode (Enabled)
This item is used to select the DCT mode (DRAM Controller mode).
F1:General Help
Options
Disabled
UMA
UMA+SIDEPORT
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Advanced Chipset Setup
Internal Graphics Mode UMA+SIDEPORT
GFX Clock Override Disabled
Share Memory Size Auto
SIDEPORT Clock Speed 400MHz
Init Display First PCI
DCT Unganged Mode Enabled
HDMI Audio Enabled
Help Item
F10: Save ESC: Exit+/-/: Value
Enter : Select: Move
HDMI Audio (Enabled)
This item is used to enable or disable the NB HDMI audio support.
Share Memory Size (Auto)
This item lets you allocate a portion of the main memory for the onboard VGA
display application.
F9: Optimized Defaults
To Next Page
Loading...
Need help?
General
