ECS A790GXM-A User Manual

38
Using BIOS
Integrated Peripherals
This page sets up some parameters for peripheral devices connected to the system.
Onboard IDE Controller (Enabled)
Use this item to enable or disable the onboard IDE interface.
SATA Configuration (Native IDE)
Use this item to show the Serial ATA Configuration options: Disabled, Compatible,
Enhanced.
Onboard AUDIO Function (Enabled)
Use this item to enable or disable the onboard Audio function.
Onboard LAN1/2 Function (Enabled)
Use these items to enable or disable the onboard LAN1/2 function.
Onboard LAN Boot ROM (Disabled)
Use this item to enable or disable the booting from the onboard LAN or a network
add-in card with a remote boot ROM installed.
Press <Esc> to return to the main menu setting page.
Onboard SATA Mode (Enabled)
Use this item to enable or disable the onboard SATA mode.
USB Functions (Enabled)
Use this item to enable or disable the USB function.
Serial Port1 Address (3F8/IRQ4)
Use this item to enable or disable the onboard COM1 serial port, and to assign a port
address.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Integrated Peripherals
Help Item
F10: Save ESC: Exit+/-/: Value
Enter : Select
F9: Optimized Defaults
F1:General Help
: Move

Options
Disabled
Enabled
Onboard SATA Mode Enabled
S
ATA Configuration Native IDE
Onboard IDE Controller Enabled
Onboard AUDIO Function Enabled
Onboard LAN1 Function Enabled
Onboard LAN2 Function Enabled
Onboard LAN Boot ROM Disabled
Serial Port1 Address 3F8/IRQ4
USB Functions Enabled

ECS A790GXM-A Specifications

General

Brand	ECS
Model	A790GXM-A
Category	Motherboard
Language	English