ECS B85H3-M User Manual

Chapter 3
B85H3-M USER MANUAL
39
CPU Configuration
The item in the menu shows the CPU.
Genuine Intel(R) CPU 0000 @ 2.50GHz
This is display-only field and displays the information of the CPU installed in your
computer.
EM64T (Supported)
This item shows the computer supports EM64T.
Processor Speed (2800MHz)
This item shows the current processor speed.
Processor Stepping (306c2)
This item shows the processor stepping version.
Microcode Revision (ffff0006)
This item shows the Microcode version.
Processor Cores (4)
This item shows the core number of the processor.
Intel HT Technology (Not Supported)
This item shows the computer not supports Intel HT Technology.
Main Advanced Chipset M.I.B. III Boot Security Exit
+/- : Change Opt.
Enter/Dbl Click : Select


: Select Screen
/Click: Select Item
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
Number of cores to enable
in each processor package.
CPU Configuration
Genuine Intel(R) CPU 0000 @ 2.50GHz
EM64T Supported
Processor Speed 2800 MHz
Processor Stepping 306c2
Microcode Revision ffff0006
Processor Cores 4
Intel HT Technology Not Supported
Intel VT-x Technology Supported
Active Processor Cores All
Limit CPUID Maximum
Disabled
Execute Disable Bit Enabled
Intel Virtualization Technology Enabled
LakeTiny Feature Enabled
CPU C3 Report Enabled
CPU C6 Report Enabled
CPU C7 Report CPU C7s
Package C State limit AUTO
Enhanced Halt (C1E) Enabled
Active Processor Cores (All)
Use this item to control the number of active processor cores.
Limit CPUID Maximum (Disabled)
Use this item to enable or disable the maximum CPUID value limit, you can enables
this item to prevent the system from “rebooting” when trying to install Windows NT
4.0.
Intel VT-x Technology (Supported)
This item shows the computer supports Intel VT-x Technology.

ECS B85H3-M Specifications

General

Brand	ECS
Model	B85H3-M
Category	Motherboard
Language	English