27
Using BIOS
Using BIOS
When you start the Setup Utility, the main menu appears. The main menu of the
Setup Utility displays a list of the options that are available. A highlight indicates
which option is currently selected. Use the cursor arrow keys to move the highlight
to other options. When an option is highlighted, execute the option by pressing
<Enter>.
Some options lead to pop-up dialog boxes that prompt you to verify that you wish to
execute that option. Other options lead to dialog boxes that prompt you for infor-
mation.
Some options (marked with a triangle
) lead to submenus that enable you to change
the values for the option. Use the cursor arrow keys to scroll through the items in the
submenu.
In this manual, default values are enclosed in parenthesis. Submenu items are denoted
by a triangle
.
BIOS Navigation Keys
The BIOS navigation keys are listed below:
Enter Select
KEY FUNCTION
Scrolls through the items on a menu
+/-/ Modifies the selected field’s values
F10 Saves the current configuration and exits setup
F1 Displays a screen that describes all key functions
F9 Loads an optimized setting for better performance
ESC Exits the current menu
The default BIOS setting for this motherboard applies for most conditions
with optimum performance. It is not suggested to change the default values
in the BIOS setup and the manufacture takes no responsibility to any dam-
age caused by changing the BIOS settings.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
