28
Using BIOS
Standard CMOS Setup
This option displays basic information about your system.
Date & Time
The Date and Time items show the current date and time on the computer. If you are
running a Windows OS, these items are automatically updated whenever you make
changes to the
W
indows Date and Time Properties utility.
Primary/Secondary/Third IDE Master/Slave
Your computer has one IDE channel and each channel can be installed with one or
two devices (Master and Slave). In addition, this motherboard supports four SA
T
A
channels and each channel allows one SATA device to be installed. Use these items to
configure each device on the SATA channel.
For the purpose of better product maintenance, we reserve the right to
change the BIOS items presented in the manual. The BIOS setup screens
shown in this chapter are for reference only. Please visit our website for
updated manual.
Date Mon 06/04/2007
Time 00 : 02 : 23
Primary IDE Master Hard Disk
Primary IDE Slave Not Detected
Secondary IDE Master Not Detected
Secondary IDE Slave Not Detected
Third IDE Master ATAPI CDROM
Third IDE Slave Not Detected
IDE BusMaster Enabled
Drive A: 1.44 MB 3
1
/
2
”
Help Item
CMOS Setup Utility -- Copyright (C) 1985-2005, American Megatrends, Inc.
User [Enter], [TAB]
or [SHIFT-TAB] to
select a field.
Use [+] or [-] to
configure system Date.
Standard CMOS Setup
: Move
F10: Save ESC: Exit
Enter : Select
+/-/: Value
F9: Load Default Settings
F1: General Help
To Next Page
Loading...
Need help?
General
Weight and Dimensions
