To Next Page

To Previous Page

Installing the Motherboard

Connecting I/O Devices

The backplane of the motherboard has the following I/O ports:

Use the three audio ports to connect audio devices. The

first jack is for stereo line-in signal. The second jack is for

stereo line-out signal. The third jack is for microphone.

PS2 Mouse Use the upper PS/2 port to connect a PS/2 pointing device.

PS2 Keyboard Use the lower PS/2 port to connect a PS/2 keyboard.

Serial Port Use the COM port to connect serial devices such as mice or

(COM) fax/modems.

VGA Port Connect your monitor to the VGA port.

LAN Port Connect an RJ-45 jack to the LAN port to connect your

computer to the Network.

USB Ports Use the USB ports to connect USB devices.

Audio Ports

This concludes Chapter 2. The next chapter covers the BIOS.

Other manuals for ECS G31T-M7

Questions and Answers:

Need help?

Do you have a question about the ECS G31T-M7 and is the answer not in the manual?

General

Number of memory slots	2
Maximum internal memory	4 GB
Processor socket	LGA 775 (Socket T)
Processor manufacturer	Intel
Compatible processor series	Intel Core 2 Duo, Intel Core 2 Quad
S/PDIF out connector	Yes
Number of COM connectors	1
Number of SATA connectors	4
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Firewire (IEEE 1394) ports	0
Audio chip	VIA VT1708B
Power source type	ATX
Audio output channels	6.1 channels
Motherboard form factor	micro ATX
BIOS type	AMI
BIOS memory size	32 Mbit