EasyManuals Logo
Home>ECS>Motherboard>GF8100VM-M5

ECS GF8100VM-M5 User Manual

ECS GF8100VM-M5
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
12
Installing the Motherboard
Installing Memory Modules
This motherboard accommodates two memory modules. It can support two 240-pin
DDR2 1066 (AM2+)/800/667/533/400. The total memory capacity is 16 GB*.
DDR2 SDRAM memory module table
Do not remove any memory module from its antistatic packaging until
you are ready to install it on the motherboard. Handle the modules only
by their edges. Do not touch the components or metal parts. Always
wear a grounding strap when you handle the modules.
You must install at least one module in any of the two slots. Each module can be
installed with 8 GB of memory; total memory capacity is 16 GB*.
Memory module Memory Bus
DDR2 400 200 MHz
DDR2 533 266 MHz
DDR2 667 333 MHz
DDR2 800 400 MHz
DDR2 1066 533 MHz
Installation Procedure
Refer to the following to install the memory modules.
1 This motherboard supports unbuffered DDR2 SDRAM only.
2 Push the latches on each side of the DIMM slot down.
6 Install any remaining DIMM modules.
Check that the cutouts on the DIMM module edge connector match the notches
in the DIMM slot.
Align the memory module with the slot. The DIMM slots are keyed with notches
and the DIMMs are keyed with cutouts so that they can only be installed correctly.
Install the DIMM module into the slot and press it firmly down until it seats
correctly. The slot latches are levered upwards and latch on to the edges of the
DIMM.
4
5
3

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ECS GF8100VM-M5 and is the answer not in the manual?

ECS GF8100VM-M5 Specifications

General IconGeneral
Number of memory slots2
Maximum internal memory16 GB
Processor socketSocket AM2
Processor manufacturerAMD
USB 2.0 connectors4
Power fan connectorYes
Number of SATA connectors6
Controller interface typeNVIDIA MCP78V
PS/2 ports quantity1
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Firewire (IEEE 1394) ports0
Audio chipVIA VT1708B
Power source typeATX
Audio output channels6.1 channels
Motherboard form factormicro ATX
BIOS typeAMI
Maximum graphics card memory512 MB
RAID levels0, 1

Related product manuals