Chapter 3
H110I-C4P USER MANUAL
37
CPU Configuration
The item in the menu shows the CPU.
Intel(R) Core(TM) i5-6600T CPU @ 2.70GHz
This is display-only field and displays the information of the CPU installed in your
comput
er.
EM64T (Supported)
This item shows the computer supports EM64T.
Processor Speed (2700MHz)
This item shows the current processor speed.
Processor Stepping (506E3)
This item shows the processor stepping version.
Microcode Revision 76)
This item shows the Microcode version.
Processor Cores (4)
This item shows the core number of the processor.
Intel HT Technology (Not Supported)
This item shows the computer not support Intel HT Technology.
Main Advanced Chipset Tweak Security Boot Exit
Number of cores to enable in
each processor package.
Active Processor Cores (All)
Use this item to control the number of active processor cores.
+/- : Change Opt.
Enter/Dbl Click : Select
: Select Screen
/Click: Select Item
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
CPU Configuration
Intel(R) Core(TM) i5-6600T CPU @ 2.70GHz
EM64T Supported
Processor Speed 2700 MHz
Processor Stepping 506E3
Microcode Revision 76
Processor Cores 4
Intel HT Technology Not Supported
Intel VT-x Technology Supported
Active Processor Cores All
Limit CPUID Maximum Disabled
Execute Disable Bit Enabled
Intel Virtualization Technology Enabled
Package C State limit AUTO
Enhanced Halt (C1E) Enabled
Hardware P states (HWP) Disabled
Intel VT-x Technology (Supported)
This item shows the computer support Intel VT-x Technology.
Limit CPUID Maximum
(Disabled)
Use this item to enable or disable the maximum CPUID value limit, you can enables
this item to prevent the system from “rebooting” when trying to install Windows NT
4.0.
To Next Page
Loading...
Need help?
General
