36
Using BIOS
Integrated Peripherals
This page sets up some parameters for peripheral devices connected to the system.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Integrated Peripherals
Onboard IDE Controller Enabled
Help Item
F10: Save ESC: Exit+/-/: Value
Enter : Select
F9: Optimized Defaults
F1:General Help
: Move
mnlk
Serial-ATA 0 Enabled
SATA Configuration SATA Mode
nVidia RAID Setup Press Enter
Onboard AUDIO Function Enabled
Onboard LAN Function Enabled
Onboard LAN Boot ROM Disabled
Serial Port1 Address 3F8/IRQ4
Serial Port2 Address Disabled
USB Functions Enabled
Legacy USB Support Enabled
Parallel Port Address 378
Parallel Port Mode ECP
ECP Mode DMA Channel DMA3
Parallel Port IRQ IRQ7
f
DISABLED: disables the
integrated IDE Control-
ler.
PRIMARY: enables only
the Primary IDE Control-
ler.
SECONDARY: enables
only the Secondary IDE
Controller.
BOTH: enables both IDE
Controllers.
SATA Configuration (SATA Mode)
Onboard IDE Controller (Enabled)
Use this item to enable or disable the onboard IDE interface.
Serial-ATA 0 (Enabled)
This item allows you to enable or disable the onboard SATA controller.
Use this item to show the mode of the Serial ATA configuration options.
nVidia RAID Setup (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
X
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
nVidia RAID Setup
RAID Setup
Help Item
F10: Save ESC: Exit+/-/: Value
Enter : Select
F9: Optimized Defaults
F1:General Help
: Move
mnlk
Press <Esc> to return to the Integrated Peripherals page.
To Next Page
Loading...
Need help?
General
