EDIFIER X3 User Manual

Accept/end a call:
single click the left or right earbud
Pause/play:
single click the left or right earbud
Previous track:
triple click the left or right earbud
Next track:
double click the left or right earbud
Voice assistant:
press and hold for 2 seconds
FAQs
When charging the charging case, the indicator is off.
Please ensure the charging case is correctly connected with power source.
No sound
Check if the earbuds are operating.
Check if the earbuds volume are at an appropriate level.
Check if the earbuds are correctly connected with mobile phone.
Check if the earbuds are operating within a normal working range.
The call quality of the earbuds are not good.
Check if mobile phone is in an area with strong signal.
Please ensure the earbuds are within effective distance (10m) and no obstacle between the earbuds and
mobile phone.

EDIFIER X3 Specifications

General

Product color	Black
Volume control	Rotary
RMS rated power	- W
Housing material	Wood
Recommended usage	Universal
Audio output channels	2.1 channels
Magnetically shielded	Yes
Amplification device form factor	Stand-alone
Satellite speaker type	-
Number of satellite speakers	2
Satellite speakers RMS power	34 W
Satellite speaker sensitivity	85 dB
Satellite speaker dimensions (WxDxH)	90 x 122 x 172 mm
Subwoofer type	Active subwoofer
Subwoofer depth	229 mm
Subwoofer width	233 mm
Subwoofer height	292 mm
Subwoofer dimensions (WxDxH)	233 x 229 x 292 mm
Subwoofer driver diameter (imperial)	6.5 \
Power source	AC
AC input voltage	220-240 V
AC input frequency	50 Hz
Power consumption (typical)	40 W
Frequency range	45 - 20000
Satellite speaker driver diameter	3 \
Connectivity technology	Wired