In case of the premium ∃DISON PRO, metal kit comes with the printer. Final product is
made by the process of 3D printing the metal clay through the nozzle and then firing
the metal clay. For this interesting 3D printing, you should first open the metal kit.
∃DISON Metal Clay Printing
Annex1. Exchanging the Extruder for the Metal Clay Printing
1 Universal Extruder
(it consists of syringe in which metal clay is contained and extruding device which discharges
required quantity)
1 Ceramic tile (used as a print bed)
1 Stainless steel brush (for processing after firing)
Universal Extruder Motor Cable Syringe
Extended Stopper Stainless Steel Brush Ceramic Tile
∃DISON PRO User Manual V.1 26
(메탈키트 구성품 사진 넣기)
1 Extended stopper (for the limited switch)
※ Visit our website to purchase additional accessories (metal clay syringes, coal crumbs, cube
box etc.) and get further information on metal clay 3D printing.
〮 Metal clay syringes : Silver/ Bronze/ Copper/ Steel
〮 Coal crumbs (carbon for preventing the metal binder from meeting with Oxygen)
〮 Cube box (for containing coal crumbs with the metal clay print-out when firing)
Mini Electric Kiln Cube box Coal crumbs
To Next Page
Loading...
General