To Next Page

To Previous Page

Version of 14 June 2016

►Menu program

Edit channel

Your channel list(s) for TV or Radio channels can be designed in this menu.

Notes: Make sure the receiver is in the correct mode. If wanting to edit radio channel lists, the receiver must

be in radio mode. The TV/Radio button enables switching between TV and Radio mode.

Standard: The left column of the menu window shows the list of the channels of the currently selected

channel list, the right column shows the symbols for 'Move', 'Lock', 'Delete', 'Rename' and 'Skip'.

Functions and settings in the menu:

Use the left/right arrow buttons to switch back and forth between the columns in the menu window, the up/

down arrow buttons to move the cursor up or down in the respective column.

Mark one or more channels in the left column by pressing the OK button . Use the red button to display an

overview of all channel lists/channel groups and enable an appropriate selection. The window overview

displays the list in which you currently are.

The green button displays other possible options. The following options are available:

Select all: All channels are selected.

Deselect all: All channels are deselected.

Select other: All channels are selected that were previously not selected.

Select TP: All channels of a transponder can be selected here.

The 'FIND' button allows quick search for channel (names). A search window appears after pressing this

button. Entry into the search field is done via a letter or numeric field actuated with the arrow buttons and by

pressing the OK button . Provided that Channels with appropriate initial characters are found in the current

list, these will be displayed on the left-hand side. Exit the search window with the EXIT button.

Edison Proton User Manual

Questions and Answers: