Auto installation
Select this item to install satellites and channels automatically with preset parameters. The receiver thereby
searches first in the first step for possible satellites and in the second step (provided satellites were found
with sufficient signal strength) for channels in order to include them in the program list.
Exit the 'Auto Installation' menu with the EXIT button. With this button, the installation process can also be
cancelled at any time.
Satellite guides
This menu item can help setting up the receiving system by entering the geographical data of the location of
the satellite system.
Functions and settings in the menu:
Local length: Set the value here for the longitude of the location where the receiving system is
located.
Local latitude: Set the value here for the latitude of the location where the receiving system is located.
Calculate: Navigate the cursor with the arrow buttons to this field and press the OK button.
The setting data of the antennas are calculated and displayed in 2 graphics.
Exit the 'Satellite guides' menu by pressing the EXIT button.
To Next Page
Loading...
Need help?
General