Efco DS 2400 H User Manual

en
20
MAINTENANCE
Maintenance Chart
Please note that the following maintenance intervals apply for normal operating
conditions only. If your daily work requires longer than normal or harsh cutting
conditions are present the suggested intervals should be shortened accordingly.
Before Each Use
After Each
Refueling Stop
After Finishing
Daily Work
Weekly
Monthly
If Damaged or Faulty
As Required
Complete Machine Inspect (Leaks, Cracks, and Wear)
XX
Clean
X
Controls (Ignition Switch, Choke Lever,
Throttle Trigger, Trigger Interlock
Check Operation
XX
Fuel Tank Inspect (Leaks, Cracks, and Wear)
XX
Clean
X
Fuel Filter Inspect (Leaks, Cracks, and Wear)
XX
Clean
X
Blade Inspect
X
Clean, Replace Filter Element
X
Every 6
Months
Drum Inspect (Damage, Sharpness, and Wear)
XX
Sharpen (Check Gauge Depth)
XX
Clutch Inspect (Damage, and Wear)
X
Replace
X
All Accessible Screws and Nuts (Not
Adjusting Screws
Inspect
X
Retighten
X
Air Filter Clean
XX
Replace
X
Every 6
Months
Cylinder Fins Clean
X
Starter System Vents Clean
X
Starter Rope Inspect (Damage and Wear)
X
Replace
X
Carburetor Check ldle (Chain must not rotate at
ldle)
XX
Spark Plug Check Electrode Gap
X
Replace
X
Every 6
Months
Vibration Mounts Inspect (Damage, and Wear)
X
Replace by Dealer
XX

Efco DS 2400 H Specifications

General

Brand	Efco
Model	DS 2400 H
Category	Trimmer
Language	English