EasyManuals Logo
Home>EINHELL>Water Pump>GC-DP 1020 N

EINHELL GC-DP 1020 N User Manual

EINHELL GC-DP 1020 N
Go to English
117 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
GB
- 17 -
8. Cleaning, maintenance and
ordering of spare parts
Danger!
Unplug the power plug prior to any mainte-
nance work.
For mobile applications, the equipment
should be cleaned with clear water after every
usage.
For stationary installation, it is recommended
that you check the floating switch for proper
operation every three months.
Use a water jet to remove any lint or fibrous
particles that may have become trapped in
the housing.
Remove sludge from the shaft bottom and
clean the shaft walls every 3 months.
Use clear water to remove deposits from the
floating switch.
8.1 Cleaning the paddle wheel
If a lot of deposits collect in the housing, the bot-
tom part of the equipment must be dismantled as
follows:
1. Disconnect the intake cage from the housing.
2. Clean the paddle wheel with clear water.
Important! Do not put down or rest the
equipment on the paddle wheel!
3. Assemble in reverse order.
8.2 Maintenance
There are no parts inside the equipment which
require additional maintenance.
8.3 Ordering replacement parts:
Please quote the following data when ordering
replacement parts:
Type of machine
Article number of the machine
Identification number of the machine
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info
9. Disposal and recycling
The equipment is supplied in packaging to pre-
vent it from being damaged in transit. The raw
materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council o ces.
10. Storage
Store the equipment and accessories in a dark
and dry place at above freezing temperature. The
ideal storage temperature is between 5 and 30
°C. Store the electric tool in its original packaging.
Anl_GC_DP_1020_N_SPK9.indb 17Anl_GC_DP_1020_N_SPK9.indb 17 16.04.2020 09:13:4216.04.2020 09:13:42
Autogoods “130”
130.com.ua

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the EINHELL GC-DP 1020 N and is the answer not in the manual?

EINHELL GC-DP 1020 N Specifications

General IconGeneral
AC input voltage230 V
AC input frequency50 Hz
Flow rate18000 l/h
Motor power- hp
Maximum delivery height9 m
Depth of immersion (max)5 m
Maximum operating pressure- bar
Solid particles size (max)20 mm
Maximum input water temperature35 °C
Cable length10 m
Suction port1\
Connecting thread type-
Proper useWhat is the intended application of the product?
Product colorRed, Silver
Housing materialStainless steel
Dimensions (WxDxH)170 x 235 x 415 mm
Carrying handle(s)Yes
Quantity1
Weight and Dimensions IconWeight and Dimensions
Depth225 mm
Width170 mm
Height415 mm
Weight7200 g
Package weight7800 g

Related product manuals