EINHELL GC-DP 1020 N User Manual

GB
- 20 -
Ser vice information
We have competent service partners in all countries named on the guarantee certifi cate whose contact
details can also be found on the guarantee certifi cate. These partners will help you with all service re-
quests such as repairs, spare and wearing part orders or the purchase of consumables.
Please note that the following parts of this product are subject to normal or natural wear and that the
following parts are therefore also required for use as consumables.
Category Example
Wear parts* Impeller
Consumables*
Missing parts
* Not necessarily included in the scope of delivery!
In the eff ect of defects or faults, please register the problem on the internet at www.isc-gmbh.info. Ple-
ase ensure that you provide a precise description of the problem and answer the following questions in
all cases:
•
Did the equipment work at all or was it defective from the beginning?
•
Did you notice anything (symptom or defect) prior to the failure?
•
What malfunction does the equipment have in your opinion (main symptom)?
Describe this malfunction.
Anl_GC_DP_1020_N_SPK9.indb 20Anl_GC_DP_1020_N_SPK9.indb 20 16.04.2020 09:13:4316.04.2020 09:13:43
Autogoods “130”
130.com.ua

EINHELL GC-DP 1020 N Specifications

General

AC input voltage	230 V
AC input frequency	50 Hz
Flow rate	18000 l/h
Motor power	- hp
Maximum delivery height	9 m
Depth of immersion (max)	5 m
Maximum operating pressure	- bar
Solid particles size (max)	20 mm
Maximum input water temperature	35 °C
Cable length	10 m
Suction port	1\
Connecting thread type	-
Proper use	What is the intended application of the product?
Product color	Red, Silver
Housing material	Stainless steel
Dimensions (WxDxH)	170 x 235 x 415 mm
Carrying handle(s)	Yes
Quantity	1

Weight and Dimensions

Depth	225 mm
Width	170 mm
Height	415 mm
Weight	7200 g
Package weight	7800 g