EINHELL GC-ET 4530 User Manual

GB
- 14 -
8.3 Maintenance
There are no parts inside the equipment which
require additional maintenance.
8.4 Ordering replacement parts:
Please quote the following data when ordering
replacement parts:
•
Type of machine
•
Article number of the machine
•
Identification number of the machine
•
Replacement part number of the part required
For our latest prices and information please go to
www.Einhell-Service.com
Spare line spool Art. no.: 34.056.85
9. Disposal and recycling
The equipment is supplied in packaging to pre-
vent it from being damaged in transit. The raw
materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council offi ces.
10. Storage
Store the equipment and accessories out of
children’s reach in a dark and dry place at above
freezing temperature. The ideal storage tempe-
rature is between 5 and 30 °C. Store the electric
tool in its original packaging.
11. Troubleshooting
The machine will not work:
Check that the power cable is connected properly
and check the mains fuses.
If the machine will not work despite the voltage
supply being OK, send it to the specifi ed after-
sales service address.
Anl_GC_ET_4530_Set_EX_UK_SPK7.indb 14Anl_GC_ET_4530_Set_EX_UK_SPK7.indb 14 24.08.2023 13:28:4524.08.2023 13:28:45

EINHELL GC-ET 4530 Specifications

General

Power source	Electric AC
AC input voltage	230 V
AC input frequency	50 Hz
Line diameter	1.4 mm
Product color	Aluminium, Black, Orange
Rotational speed	8800 RPM
Secondary handle	Yes
Line length supplied	10 m
Cutting diameter (max)	300 mm

Weight and Dimensions

Depth	940 mm
Width	255 mm
Length	140 mm
Weight	2640 g