EINHELL GC-ET 4530 User Manual

GB
- 11 -
2. Layout and items supplied
2.1 Layout (Fig. 1/2)
1. Power cable
2. Upper handle
3. On/Off switch
4. Additional handle
5. Screw for additional handle
6. Lock for handlebar height adjustment
7. Top handlebar
8. Bottom handlebar
9. Edge guide
10. Lock for rotatable motor head
11. Line spool
12. Guard hood
13. Cable strain-relief clip
14. 4 screws
15. Lock for adjusting the angle of the handlebar
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made your purchase at
the latest within 5 working days after purchasing
the product and upon presentation of a valid bill
of purchase. Also, refer to the warranty table in
the service information at the end of the operating
instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
1x grass trimmer
•
1x guard hood
•
1x edge guide
•
4 screws
•
Original operating instructions
•
Safety instructions
3. Proper use
The equipment is designed for cutting lawns and
small areas of grass in private and hobby gar-
dens.
Equipment designed for use in private and hobby
gardens is regarded as unsuitable for use in pub-
lic facilities, parks and sports centers, along road-
ways, or in agriculture and forestry. The operating
instructions as supplied by the manufacturer must
be kept and referred to in order to ensure that the
equipment is properly used and maintained.
Important. This equipment must not be used
for composting purposes (shredding) as this
could result in injury or damage to property.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Technical data
Mains voltage ................................ 230 V ~ 50 Hz
Power ........................................................ 450 W
Cutting circle ............................... Diameter 30 cm
Revolutions n
0
...................................... 8800 rpm
Cutting line diameter ............................... 1.4 mm
Weight ........................................................2.6 kg
Danger!
Sound and vibration
L
pA
sound pressure level ..................... 71.9 dB(A)
K
pA
uncertainty ..........................................2.1 dB
L
WA
sound power level ........................ 91.9 dB(A)
K
WA
uncertainty ..........................................2.1 dB
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN 60745.
Anl_GC_ET_4530_Set_EX_UK_SPK7.indb 11Anl_GC_ET_4530_Set_EX_UK_SPK7.indb 11 24.08.2023 13:28:4524.08.2023 13:28:45

EINHELL GC-ET 4530 Specifications

General

Power source	Electric AC
AC input voltage	230 V
AC input frequency	50 Hz
Line diameter	1.4 mm
Product color	Aluminium, Black, Orange
Rotational speed	8800 RPM
Secondary handle	Yes
Line length supplied	10 m
Cutting diameter (max)	300 mm

Weight and Dimensions

Depth	940 mm
Width	255 mm
Length	140 mm
Weight	2640 g