EINHELL GC-ET 4530 User Manual

GB
- 16 -
Service information
We have competent service partners in all countries named on the guarantee certifi cate whose contact
details can also be found on the guarantee certifi cate. These partners will help you with all service re-
quests such as repairs, spare and wearing part orders or the purchase of consumables.
Please note that the following parts of this product are subject to normal or natural wear and that the
following parts are therefore also required for use as consumables.
Category Example
Wear parts* Line spool holder
Consumables* Line spool
Missing parts
* Not necessarily included in the scope of delivery!
In the eff ect of defects or faults, please register the problem on the internet at www.Einhell-Service.com.
Please ensure that you provide a precise description of the problem and answer the following questions
in all cases:
•
Did the equipment work at all or was it defective from the beginning?
•
Did you notice anything (symptom or defect) prior to the failure?
•
What malfunction does the equipment have in your opinion (main symptom)?
Describe this malfunction.
Anl_GC_ET_4530_Set_EX_UK_SPK7.indb 16Anl_GC_ET_4530_Set_EX_UK_SPK7.indb 16 24.08.2023 13:28:4524.08.2023 13:28:45

EINHELL GC-ET 4530 Specifications

General

Power source	Electric AC
AC input voltage	230 V
AC input frequency	50 Hz
Line diameter	1.4 mm
Product color	Aluminium, Black, Orange
Rotational speed	8800 RPM
Secondary handle	Yes
Line length supplied	10 m
Cutting diameter (max)	300 mm

Weight and Dimensions

Depth	940 mm
Width	255 mm
Length	140 mm
Weight	2640 g