EINHELL STE 2000 User Manual

15
GB
16. Troubleshooting
Fault
Engine does not start
Generator has too little or no
voltage
Cause
Automatic oil cut-out has not res-
ponded
No fuel
Controller or capacitor defective
Overcurrent circuit-breaker has
triggered
Air filter dirty
Remedy
Check the oil level, top up with
engine oil
Refuel
Contact your dealer
Actuate the circuit-breaker and
reduce the consumers
Clean or replace the filter
Anleitung STE 2000_SPK7:Anleitung STE 3500 SPK1 18.06.2007 7:39 Uhr Seite 15

EINHELL STE 2000 Specifications

General

Brand	EINHELL
Model	STE 2000
Category	Portable Generator
Language	English