EINHELL TC-AG 125 User Manual

GB
- 21 -
Service information
We have competent service partners in all countries named on the guarantee certifi cate whose contact
details can also be found on the guarantee certifi cate. These partners will help you with all service re-
quests such as repairs, spare and wearing part orders or the purchase of consumables.
Please note that the following parts of this product are subject to normal or natural wear and that the
following parts are therefore also required for use as consumables.
Category Example
Wear parts* Carbon brushes
Consumables* Cutting wheels, grinding wheels
Missing parts
* Not necessarily included in the scope of delivery!
In the eff ect of defects or faults, please register the problem on the internet at www.isc-gmbh.info. Ple-
ase ensure that you provide a precise description of the problem and answer the following questions in
all cases:
•
Did the equipment work at all or was it defective from the beginning?
•
Did you notice anything (symptom or defect) prior to the failure?
•
What malfunction does the equipment have in your opinion (main symptom)?
Describe this malfunction.
Anl_TC_AG_125_SPK9.indb 21Anl_TC_AG_125_SPK9.indb 21 05.11.2019 08:25:0305.11.2019 08:25:03

EINHELL TC-AG 125 Specifications

General

Spindle thread	M14
Idle speed (max)	11000 RPM
Sound power level	94.2 dB
Sound pressure level	83.2 dB
Grinding disc diameter	125 mm
Vibration level (grinding)	4.9 m/s²
Vibration level uncertainty (grinding)	1.5 m/s²
Input power	850 W
Power source	AC
AC input voltage	230 V
AC input frequency	50 Hz
Sound pressure level uncertainty	3 dB
Product color	Black, Red

Weight and Dimensions

Width	115 mm
Height	100 mm
Length	295 mm
Weight	2100 g
Package weight	2300 g