4-2. Functions of the “Administrator Settings” Menu
Function Setting Value Description
Auto Input Detection On
O
This function automatically recognizes the connector through
which PC signals are input, and displays images on the
screen accordingly.
• “On”
When the monitor is connected to multiple PCs, if a
specic PC enters power saving mode or no signals
are input to the monitor, the connector is automatically
changed to another one to which signals are input.
• “O”
This function displays the signal from the selected
connector regardless of whether a signal is input or not.
In this case, you can select the input signal to display
using the
operation switch on the front of the monitor.
For details, see “2-2. Switching Input Signals” (page
12).
Note
• This product automatically recognizes the connector
through which PC signals are input, and displays images
on the screen accordingly regardless of whether this
function is set to On or O just after the main power
switch on the rear side of the monitor has been turned
on.
• When this function is set to “On”, the monitor only enters
the power saving mode when signals are not input from
any PC.
Compatibility Mode On
O
If you want to avoid the following phenomena, set this function
to "On".
• The positions of windows and icons are shifted when the
monitor is turned o / on or has returned from the power
saving mode.
• Power Save function of the PC does not work normally.
• When the power to the monitor is turned o, a device
connected to the USB downstream port does not work.
On-Screen Logo On
O
When the monitor is turned on, the EIZO logo appears on the
screen.
When this function is set to “O”, the EIZO logo does not
appear.
26
Chapter 4 Administrator Settings
To Next Page
Loading...
Need help?
General