Eizo FlexScan EV2360-WT User Manual

6-4. Removing the Stand Base
The stand base that was attached during setup can be detached using the following procedures.
1.
Lay the LCD monitor on a soft cloth spread over a stable and at surface with
the LCD panel surface facing down.
2.
Raise the lever on the bottom of the stand base.
3.
Turn the stand base in the counterclockwise direction to detach it.
35
Chapter 6 Attaching/Removing the Stand

Eizo FlexScan EV2360-WT Specifications

General

Brand	Eizo
Model	FlexScan EV2360-WT
Category	Monitor
Language	English