Eizo FlexScan EV3237 User Manual

- 37 -
Chapter 4 Administrator Settings
Function Setting Range Description Note
HDMI HPD Control On
Off
When a PC is connected via the HDMI connector, the screen
may not be displayed depending on the device. If this happens,
set this function to “On”.
-
Auto PbyP Resolution On
Off
This product automatically changes the resolution according to
the screen layout when changing to PbyP display.
Set this function to “Off” to prevent the resolution from changing
automatically when changing to PbyP display. In this case,
change the resolution manually. (For the recommended screen
resolutions in PbyP display, see page 17.)
• If the resolution does not change correctly during
PbyP display, it is recommended to change this
setting to “Off”.
DiplayPort 1 (Ver.)
DiplayPort 2 (Ver.)
1.1
1.2
When a PC is connected via a DisplayPort connector, the screen
may not be displayed due to DisplayPort version differences with
the PC. If this happens, select the signal that is not displayed
(DisplayPort 1 or DisplayPort 2), and change this setting to “1.1”.
• If “1.1” is set, the resolution of 3840 × 2160 (60 Hz)
cannot be displayed.
USB Power Save On
Off
This product can disable USB communication with a PC when
the monitor enters power saving mode or when the monitor is
turned off. Disabling USB communication can reduce power
consumption in power saving mode.
When this function is set to “Off”, USB connections can be left
enabled even when the monitor enters power saving mode or
when the monitor is turned off.
• When this function is set to “On”, make sure to
disconnect any communication between connected
USB devices and the PC before turning off the
monitor. If storage devices, such as a USB ash
drive, are connected, turning off the monitor before
completing communication may result in data loss
or damage to storage devices.
• When this function is set to “On”, the monitor
cannot be controlled using software, such as
“ScreenManager Pro”, when the monitor is in power
saving mode or when the monitor is turned off.
• When this function is set to “Off”, power
consumption is higher in power saving mode and
when the monitor is turned off.
On-Screen Logo On
Off
When the monitor is turned on, the EIZO logo appears on the
screen.
When this function is set to “Off”, the EIZO logo does not appear.
-
Key Lock On
Off
In order to prevent changes to settings, the operation buttons on
the front of the monitor can be locked.
• The following operation is available even if the
buttons are locked:
- Turning on or off the monitor with the Power
button

Eizo FlexScan EV3237 Specifications

General

3D	No
Pixel pitch	0.1815 x 0.1815 mm
Aspect ratio	16:9
Screen shape	Flat
Display diagonal	31.5 \
Display technology	LED
Viewable size, vertical	392 mm
Contrast ratio (typical)	1000:1
Display number of colors	16.78 million colors
Viewable size, horizontal	696.9 mm
Display brightness (typical)	300 cd/m²
Supported graphics resolutions	720 x 400, 800 x 600 (SVGA), 1280 x 1024 (SXGA), 1680 x 1050 (WSXGA+), 1920 x 1200 (WUXGA), 2560 x 1440, 3840 x 2160
On/off switch	Yes
DVI-D ports quantity	1
Headphone connectivity	3.5 mm
USB upstream port type	USB Type-B
VGA (D-Sub) ports quantity	0
USB Type-A downstream ports quantity	3
Product color	Black
Market positioning	-
Tilt angle range	-5 - 35 °
Panel mounting interface	100 x 100 mm
On Screen Display (OSD) languages	CHI (SIMPL), CHI (TR), DEU, ENG, ESP, FRE, ITA, JPN, SWE
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	105 W
Annual energy consumption	57 kWh
Power consumption (standby)	0.5 W
Power consumption (typical)	39 W
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Sustainability certificates	EPEAT Gold, ENERGY STAR

Weight and Dimensions

Depth (with stand)	245 mm
Height (with stand)	578 mm
Weight (with stand)	10600 g
Depth (without stand)	59.5 mm
Width (without stand)	731 mm
Height (without stand)	428 mm
Weight (without stand)	7800 g