Problem Possible cause Remedy
The oven does not heat
up.
The clock is not set. Set the clock.
The oven does not heat
up.
The necessary settings
are not set.
Make sure that the set-
tings are correct.
The oven does not heat
up.
The fuse in the fuse box
is released.
Do a check of the fuse. If
the fuse is released more
than one time, contact a
qualified electrician.
The oven lamp does not
operate.
The oven lamp is defec-
tive.
Replace the oven lamp.
The display shows F11. The core temperature
sensor has a short-circuit
or the core temperature
sensor plug is not tightly
in position in the socket.
Insert the core tempera-
ture sensor plug as far as
it goes into the socket on
the front of the appliance.
The display shows
12.00.
There was a power cut. Set the clock.
Steam and condensation
settle on the food and in
the oven.
You left the dish in the
oven for too long.
Do not keep the dishes in
the oven for longer than
15 - 20 minutes after the
cooking ends.
If you cannot find a solution to the prob-
lem yourself, contact your dealer or the
service centre.
The necessary data for the service centre
is on the rating plate. The rating plate is
on the front frame of the appliance cavity.
We recommend that you write the data here:
Model (MOD.) .........................................
Product number (PNC) .........................................
Serial number (S.N.) .........................................
12. TECHNICAL DATA
Voltage 230 V
Frequency 50 Hz
13. INSTALLATION
WARNING!
Refer to the Safety chapters.
ENGLISH 25
To Next Page
Loading...
Need help?
General
